Make sure your vehicle is off. Turn on the Hazard. Then hold down the 0.0/SET button while turning the vehicle to the on position. After that, it’s going to ask you if you want to reset the oil service. So then what you’re going to do on that is you’re going to press the OK button on the steering wheel to reset it. That it is the full procedure how to reset oil service light Mercury Grand Marquis. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Mercury cars. Or any warning light for service reminder which appears on the display. Start the engine and press the odometer button to bring up the trip meter A reading. Make sure odometer (ODO) is displaying total mileage (usually the ‘A’ display). Turn off vehicle, if on. While vehicle is off, press and hold ODO reset / readout button. Continuing to hold down ODO button, turn the key in ignition. until dash lights come on. That it is the full procedure how to reset oil service light Mini R53. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for MINI cars. Or any warning light for service reminder which appears on the display. So now all you need to do is: Turn on your car. First, sit in the car with the key and then hit the START button twice until everything lights up. Press the HOME button. Next what you do is is hit the HOME button on the center console to bring you to the main menu. Go to the APPLICATION. The next step is to get into the Maintenance. Select OIL CHANGE. At this point, you can see some maintenance options. So we want pull-downs to go to Oil Change and it will show that you have some miles before the next before the oil changes. Select RESET. From there you can change the settings or you can go to the bottom and reset it. Confirm it Scroll to the VEHICLE menu. From this menu find the VEHICLE and go over right. Select OIL LIFE RESET. Highlight the Oil Life Reset and then hit the button. Press and hold the OK button. Once you get there, hold the OK button down until the oil life display changes to 100 percent. Press and hold the “ Trip ” or “ Disp ” button. Continue to hold the “ Trip ” or “ Disp ” button while turning the ignition of the vehicle on. On push button models, press the Engine Start button two times. Do not start the engine. When the odometer displays all zeros, it will confirm the maintenance light has been reset. eXbPVs.

how do you reset the maintenance light