Uni Filter Two Stage Foam Air Filter KTM 690 Enduro/R/SMC/ Husqvarna 701 2008-2018. Our friends at UNI Australia have come up with another filter that we feel is going to be a necessity for all 690 Enduro and 690 SMC owners. Get ride of that stock paper filter that is in your bike for this foam unit that allows more airflow and is washab. The KTM 690 Enduro R is powered by a 690cc liquid-cooled, single-cylinder engine that delivers an impressive 73 hp max power and 72 Nm of peak torque. The engine is mated to a six-speed transmission that provides smooth and seamless gear changes. First up: KTM’s 790 Adventure R, the reigning ­champion of the middleweight class. On the Cycle World Dynojet 250i, the KTM produced 83.4 hp at 8,500 rpm and 57.7 pound-feet at 6,800 rpm, Its 693cc 4-valve, single-cylinder, liquid-cooled engine makes 74 horsepower and 54 lb.-ft. It combines powerful acceleration from idle with easy upshifting, refined feel, and low consumption. In addition, its six-speed gearbox with Quickshifter+ is smooth and enables quicker, clutchless shifts when you’re on the go. I am considering KTM 690 Enduro R vs. KTM 640 Adventure. Looking used I can find: KTM 640, well modified with steering stabilizer, new muffler, etc for ~$5500 KTM 690, modified with muffler for ~9500 (same price as new 2009 after the mark down, but with upgrades) Am I going to be jealous quickly if I try to save $4000? And sure enough, peak power for the Husky was 46.32hp, whilst the KTM produced 50.26hp – ten percent more. Similarly, the 690 put out 39.19ft-lb of torque, to the 630’s 34.16. But that isn’t the full story…. Look at the curves that the (DOHC) Husqvarna produces. KTM 690 Enduro Supermoto Conversion kit. Kit Includes. 17×3.50 Front & 17×4.25 or 17×5.00 Rear; Anodized 7000 Series Aluminum Rims; Stainless Steel Spokes and Nipples; Colored nipples are anodized aluminum; Aluminum anodized Hubs; Stainless Steel Front & Rear Rotors OEM Size; ABS Rings If applicable; Optional Warp 9 Carrier/Sprocket; 40, 42 Relatively speaking both make HP at about the same RPMs but it's the Torque that is the most impressive. 690 Doesn't even approach 40 lb/ft until 5500 RPM. While the Tenere makes a peak 44lb/ft at 6600RPM the reality is it makes OVER 40lb/ft from ~2200 all the way through to 8000 RPM. dZnilVG.

ktm 690 enduro r hp